NEC model paper — Electrical Engineering (undated)
80 questions. Practise this paper at your own pace.
Choose another paper or set
Loading answer access…
Question 1
Decibel relation for power gain is:
Question 2
Maximum power that can be transferred from source to load is:
Question 3
Power factor (ZR) has maximum value of:
Question 4
At series resonance, the voltage across L or C is:
Question 5
The minimum phase transfer function is the one having .......
Question 6
If the polynomial P(s) and its derivative gives a continued fraction expansion with coefficients, then the polynomial P(s) is Hurwitz.
Question 7
Which of the following device has negative resistance?
Question 8
A MOSFET uses the electric field of a to control the channel current.
Question 9
An oscillator produces oscillations due to .......
Question 10
The noise factor of an ideal amplifier is ...........dB.
Question 11
Logarithmic amplifiers are used in .......
Question 12
In standard TTL, the 'totem pole' refers to .......
Question 13
Two's complement of 00011011 is:
Question 14
Elementary building block of combinational circuit is:
Question 15
Synchronous circuit that changes its state at specific clock signal is:
Question 16
Bandwidth of microprocessor represents:
Question 17
PPI 8255 has internal bus of size:
Question 18
RISC is characterized by .......
Question 19
Which among of the following doesn't come under object-oriented programming concept?
Question 20
If statement condition is always written in. Parenthesis.
Question 21
Recursive function is similar to
Question 22
In general, the index of the first element in an array is
Question 23
Programmers use when they need to pass a group of related variables.
Question 24
If same message is passed to objects of several different classes and all of those can respond in a different way, this feature is called
Question 25
The static error of an instrument implies the
Question 26
Sensitivity of a sensor can be depicted by
Question 27
In a circuit, an ammeter is always connected in
Question 28
Which of the following is not a characteristic of an open loop system?
Question 29
First order system is defined by
Question 30
Root locus always starts from
Question 31
In an ideal transformer, the no load primary current I0
Question 32
The function of brushes in a DC generator is to
Question 33
The speed of a DC motor can be varied by varying
Question 34
An induction motor is .......
Question 35
When the speed of a synchronous generator increases, then
Question 36
When any one phase of a 3-phase synchronous motor is short-circuited, the motor .......
Question 37
In an analog communication, a unit impulse response of a causal system is ....... for t<0.
Question 38
If the gain crossover frequency of a system is less than its phase cross over frequency, then the system is .......
Question 39
In inverse DTFT, the limits of the integral is defined between −π to π because of the property .......
Question 40
One-sided z-transform is also known as .......
Question 41
What is the stability of the system s3+s2+s+4=0 using Hurwitz criteria?
Question 42
The transfer function of FIR filters will have
Question 43
Which modulation is used in microwave band?
Question 44
Thermal noise is independent of
Question 45
is mostly preferred for telegraphy.
Question 46
The process of converting the analog sample into discrete form is called
Question 47
Which of the following is not a property of block code?
Question 48
The open standard interconnection (OSI) model is a. layer model for the design of network system.
Question 49
Which of the following pollutant causes acid rain?
Question 50
What is the purpose of impedance matching in transmission lines?
Question 51
The primary function of the fuse is to
Question 52
Which type of wiring is suitable for multi-storey buildings?
Question 53
Input ripple of SMPS is
Question 54
is a series type unbalanced fault that occurs in a power system.
Question 55
Standard dimensions (mm×mm) of A3 drawing sheet is
Question 56
Which of the following methods of charging depreciation of an asset has increased amount of depreciation as the age of asset increases
Question 57
The process of optimizing the project's limited resources without extending the project duration is known as
Question 58
The process of composing/raising the required fund from different sources such as equity, preferred stock, bond and debenture is known as
Question 59
In which of the following society, people used to seek their existence on growing plants for their cattle and domestic animals
Question 60
According to Nepal Engineering Council Act, 2055 (Revised, 2079), all engineering academic institutions shall be in the Council.
Question 61
Two equal resistances of resistors are connected in series across a certain supply. If the resistances are now connected in parallel, the power produced will become:
Question 62
For ac circuit, the form factor is the ratio of?
Question 63
For the two port network, the condition of symmetry in terms of z-parameters is:
Question 64
The transient current in an RLC circuit is oscillatory when:
Question 65
In an intrinsic semiconductor:
Question 66
JFET is considered as a voltage-controlled device because:
Question 67
In a properly connected BJT, an increase in base current causes increase in:
Question 68
The common mode rejection ration (CMRR) of an ideal OP-Amp is:
Question 69
A half-adder can be constructed from
Question 70
A J-K flip-flop can be made from an R-S flip-flop by using two additional:
Question 71
A microprocessor has eight data lines and sixteen address lines. The microprocessor is of type:
Question 72
Permanent memory of a computer is known as:
Question 73
In a login system, the attempts are allowed up to 3 times. Which type of loop is best suited in this system?
Question 74
Which programming language is called the mother of programming languages?
Question 75
What does the format specifier %10d in printf("%10d",num); do?
Question 76
What is the meaning of the following declaration in C programming language? int(\*p)\[5]
Question 77
A meter reads 125 V and the true value is 125.5 V. What is static error of the instrument?
Question 78
Thermo couples are:
Question 79
Phase margin of a system is used to specify which of the following?
Question 80
Which is the correct formula for the transfer function of positive feedback?